5
Operation of Current
Device
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating this appliance.
The power supply cord contains a current device that senses damage to the power cord. To test your
power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will
notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is also indi-
cated by a light on the plug head).
NOTES:
•
Do not use this device to turn the unit on or off.
•
Always make sure the RESET button is pushed in for correct operation.
•
The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or
it cannot be reset. A new one can be obtained from the product manufacturer.
•
If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one obtained from
the product manufacturer.
Unit Description
Accessories Included
•
Check all the accessories are included in the package and please refer to the
installation instructions for their usage.
Fig.2
Fig.1
EXHAUST ADAPTOR & FLEXIBLE DUCTING
1
WALL ADAPTOR (FOR PERMANENT
1
DUCT MOUNTING)
WINDOW ADAPTOR
1
WINDOW SLIDING KIT
1
WALL PLUG
4
SCREWS
4
ALKALINE BATTERIES
2
REMOTE CONTROL
1
WATER PUMP DRAIN HOSE
1
PART:
PART NAME:
QTY.:
REAR VIEW
SIDE VIEW
FRONT VIEW
CONTROL PANEL
ROOM AIR
DISCHARGE
REMOTE
CONTROL
CASTORS
REAR COVER
FRONT COVER
AIR INLET
WATER PUMP
DRAIN HOSE
POWER CORD
AIR INLET
WARM AIR
DISCHARGE
TO OUTSIDE
AIR INLET
CONTINUOUS
DRAIN HOSE
SZ000373(En)-YaoKong(p1-5)
2004.11.10, 4:54 PM
5
