background image

Air Conditioner features

(continued)

TO TURN UNIT OFF:

    DO THIS:
  

PRESS ON/

OFF BUTTON

ADDITIONAL THINGS YOU SHOULD KNOW

Now that you have mastered the operating procedure, here are more features in your control that you should become 
familiar  with.
  The 

 Cool

 circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents 

overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.
The control will maintain the set temperature within 2  F, between 60 F and 90 F degrees.
The  control  is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to 
the other and back, press and hold the 

 TEMP/TIMER

 Up (     ) and Down (     ) buttons together for 3 seconds.

 

EXHAUST CONTROL

This Exhaust Control allows the air conditioner to either recirculate inside air (CLOSED) or exhaust air to the outside 
(OPEN).  
The CLOSED position is used when maximum cooling is  desired. It  may also  be  used  for  air  recirculation  without 
cooling  when the air conditioner is set in any FAN position. 
The  OPEN  position  removes  stale  air  from  the  room  and exhausts it to  the outside. Fresh air is drawn in through
 normal passages in the home.
 

4-WAY LOUVERS

The 4-Way air directional louvers allow you to direct air flow 
up or down, left or right throughout the room as needed.

:

:

Temp/Timer

Temp/Timer

   

Fan

   

Fan

Temp/Timer

Temp/Timer

Timer

Timer

On/Off

On/Off

:

:

Temp/Timer

Temp/Timer

   

Fan

   

Fan

Temp/Timer

Temp/Timer

Timer

Timer

On/Off

On/Off

YOU WILL SEE:

:

:

ÈÕÆÚ£º2004-11-1

ÈÕÆÚ£º2004-11-1

Temp/Timer

Temp/Timer

   

Fan

   

Fan

Temp/Timer

Temp/Timer

Sleep

Sleep

Timer

Timer

Check
  Filter

Check
  Filter

On/Off

On/Off

Temp/Timer

Temp/Timer

   

Fan

   

Fan

Temp/Timer

Temp/Timer

Sleep

Sleep

Timer

Timer

Check
  Filter

Check
  Filter

On/Off

On/Off

  9

Summary of Contents for FAK127P1V












Reviews: