background image

Temp/Timer

Temp/Timer

   

Fan

   

Fan

Temp/Timer

Temp/Timer

Timer

Timer

On/Off

On/Off

Temp/Timer

Temp/Timer

   

Fan

   

Fan

Temp/Timer

Temp/Timer

Timer

Timer

On/Off

On/Off

Air Conditioner Features

(continued)

NOTE: The following instructions represent the Control Panel, 
the same instructions can be used for the Remote Control.

TO TURN UNIT ON:

YOU WILL SEE:

  DO THIS:

PRESS ON/
  OFF PAD

TO CHANGE TEMPERATURE
SETTING:

YOU WILL SEE:

  DO THIS:

PRESS TO 
   RAISE

PRESS TO 
   LOWER

NOTE: 

Tap or hold  either up(     ) or down (     ) button until 

the   desired  temperature   is  seen  on   the  display.  This 
temperature  will  be  automatically  maintained anywhere 
between   60 F(15 C)   and  90 F  (32 C).  If  you   want   the 
display  to  read   the  actual  room  temperature.  See 

“ 

To 

Operate on Fan Only

 section on Page 7.

TO ADJUST FAN SPEEDS:

YOU WILL SEE:

    DO THIS:
   

PRESS TO 

    SELECT:
       LOW,
MED or HIGH

The chosen fan speed LED will light up.  

Temp/Timer

Temp/Timer

   

Fan

   

Fan

Temp/Timer

Temp/Timer

Timer

Timer

On/Off

On/Off

Temp/Timer

Temp/Timer

   

Fan

   

Fan

Temp/Timer

Temp/Timer

Timer

Timer

On/Off

On/Off

  6

Temp/Timer

Temp/Timer

   

Fan

   

Fan

Temp/Timer

Temp/Timer

Timer

Timer

On/Off

On/Off

Temp/Timer

Temp/Timer

   

Fan

   

Fan

Temp/Timer

Temp/Timer

Timer

Timer

On/Off

On/Off

Summary of Contents for FAK127P1V












Reviews: