background image

10

ADDITIONAL THINGS YOU SHOULD KNOW

Now that you have mastered the operating  procedure, here are more features in your control that you should become 

The 

Cool

 circuit has an automatic 3 minute time delayed start if the unit is  turned  off and on quickly.  This prevents 

    overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.

The control will maintain the set temperature within 2 F, between 60 F and 90 F degrees.
The  control  is  capable of  displaying  temperature in degrees Fahrenheit or degrees Celsius. To convert from one to 

    the other and back, press and hold the 

 TEMP/TIMER

 Up (     ) and Down (     ) buttons together for 3 seconds.

 

familiar with.

4-Way Louvers

Air  directional  louvers  control  air  flow direction. You air  conditioner 
has the louver type described below.

Auger Type
The louvers will allow you  to direct the air flow Up or Down and Left  or
Right throughout the room as  needed. Rotate  the  Auger  Wheel  until 
the  desired  Left/Right  direction  is obtained. Pivot horizontal louvers
until the desired Up/Down direction is obtained. 

Air Conditioner Features

(continued)

Auto  

Auto  

Low

Low

Med

Med

High

High

   Fan

   Fan

Te

m

p

/T

im

e

r

Te

m

p

/T

im

e

r

Te

m
p

/T

im
e

r

Te

m
p

/T

im
e

r

Sleep

Sleep

On/Off

On/Off

Timer

Timer

Cool

Cool

Energy  

Saver

Energy  

Saver

Fan

Fan

Heat

Heat

Mode

Mode

Check
  Filter

Check
  Filter

Care and Cleaning

Clean  your  air  conditioner  occasionally  to keep  it  looking new. 

Be 

sure  to  unplug the  unit before cleaning to prevent shock or  fire 
hazards:

Air Filter Cleaning

The  air  filter  should  be  checked   at  least  once  a  month  to  see   if 
cleaning is necessary. Trapped  particles in the  filter can  build up and  
cause an accumulation of frost on the cooling coils.

Grasp the filter by the center and pull up and out.
Wash the filter using liquid dishwashing detergent  and warm  water.  

    Rinse  filter  thoroughly.  Gently  shake  excess water from the filter. 
    Be sure  filter is  thoroughly dry  before replacing.

Or, instead of washing you may vacuum the filter clean.

Cabinet Cleaning

Be  sure  to  unplug  the  air  conditioner  to   prevent  shock  or   fire 

    hazard. The cabinet and front may  be dusted with  an oil-free  cloth 
    or  washed  with  a cloth dampened in a  solution of warm water  and 
    mild liquid dishwashing detergent. Rinse thoroughly and wipe dry.

Never use harsh cleaner, wax or polish on the cabinet front.
Be  sure  to  wring  excess   water   from   the   cloth   before   wiping  

   around  the  controls. Excess  water  in  or  around  the controls may 
   cause damage to the air conditioner.

Plug in air conditioner.

Winter Storage

If  you  plan  to  store  the  air  conditioner  during  the  winter,  remove 
it    carefully    from    the    window    according    to    the    installation 
instructions. Cover it with plastic or return  it to the original carton.

NOTE:  To  prevent   rust  or   electrical  connections  from  being  
damaged,  store  air  conditioner  in  an  upright position and in a 
dry place.  

Air Filter

Summary of Contents for FAH12EP2T1












Reviews: