background image

14 

 

 

LIMITED MANUFACTURER’S WARRANTY 

This appliance is covered by a limited manufacturer’s warranty. For one year 

from the original date of purchase, the manufacturer will repair or replace any 

parts of this appliance that prove to be defective in materials and 

workmanship, provided the appliance has been used under normal operating 

conditions as intended by the manufacturer.  

Warranty Terms:                                                                                                       

During the first year, any components of this appliance found to be defective 

due to materials or workmanship will be repaired or replaced, at the 

manufacturer’s discretion, at no charge to the original purchaser. The 

purchaser will be responsible for any removal or transportation costs. 

 

Warranty Exclusions:                                                                                                      

The warranty will not apply if the damage is caused by any of the following: 

 

 

Power failure  

 

Damage in transit or when moving the appliance  

 

Improper power supply such as low voltage, defective household wiring or 

inadequate fuses  

 

Accident, alteration, misuse or abuse of the appliance such as using non-

approved accessories, inadequate air circulation in the room or abnormal 

operating conditions (extreme temperatures)  

 

Use in commercial or industrial applications  

 

Fire, water damage, theft, war, riot, hostility or acts of God such as 

hurricanes, floods, etc.  

 

Use of force or damage caused by external influences  

 

Adjustments to temperature by removal of stickers 

and/or

 screws  

 

Partially or completely dismantled appliances  

Obtaining Service:                                                                                                     

When making a warranty claim, please have the original bill of purchase with 

purchase date available. The purchaser will be responsible for any removal or 

transportation c

osts. Replacement parts and/or units will be new, 

remanufactured or refurbished and are subject to the manufacturer’s 

discretion.  

For technical support and warranty service, please email [email protected]

 

Summary of Contents for EC100WF















Reviews: