background image

12

Up and down arrow pads

— Use with the

feature or function pads to set oven

temperature, bake time, start time, clean time

(when programming an automatic start time),

setting or adjusting the clock and minute timer.

READ  THE  INSTRUCTIONS  CAREFULLY  BEFORE  USING  THE  OVEN.

For satisfactory use of your oven, become familiar with the various pad functions of the oven as described below.

OVEN CONTROL FUNCTIONS

Oven control 

(for models with Quick Bake™ only)

Broil pad

— Use to

select the variable

broil feature.

Bake pad

—Use

to select the bake

feature.

Start time pad

Used to set the

desired start time

for baking & Self-

Clean. May be used

with 

Bake time

 to

program a delayed

bake cycle.

Bake time pad

Used to enter the

length of baking time

needed.

Self-clean pad

Use to set a Self-

Clean cycle.

Oven, preheat & door locked lights* 

— The 

"Oven" light

will glow each time the oven turns on to maintain the set oven

temperature. The 

"Preheat" light 

will glow when the oven is

first set to operate, or if the desired temperature is reset higher

than the actual oven temperature. The 

"Door locked" light

 will

flash when the oven door locks and unlocks, the oven door

lockout is active or when the Self-Clean cycle feature is active.

Feature indicator

lights

— These lights

show which feature is

active.

Set clock pad

Used to set the time

of day.

Cancel pad

— Use

to clear any feature

previously entered

except the time of

day and minute

timer. Press 

Cancel

to stop cooking.

Timer On/Off pad

Use to set or cancel

the minute timer. The

minute timer does not

start or stop cooking.

Also,

Timer On/Off

 pad is

used to set the

continuous bake

function.

Oven light pad

Use to turn the

interior oven light

ON or OFF.

Door lock

 icon

 

pad

activates oven door

lockout settings.

Broil pad

— Use to

select the variable

broil feature.

Up and down arrow pads

— Use with the

feature or function pads to set oven

temperature, bake time, start time, clean time

(when programming an automatic start time),

setting or adjusting the clock and minute timer.

Bake pad

—Use

to select the bake

feature.

Start time pad

Used to set the desired

start time for baking &

Self-Clean. May be

used with 

Bake time

to program a delayed

bake cycle.

Bake time pad

Used to enter the

length of baking time

needed.

Self-clean pad

Use to set a Self-

Clean cycle.

Oven, preheat & door locked lights* 

— The 

"Oven" light

will glow each time the oven turns on to maintain the set oven

temperature. The 

"Preheat" light 

will glow when the oven is

first set to operate, or if the desired temperature is reset higher

than the actual oven temperature. The 

"Door locked" light

 will

flash when the oven door locks and unlocks, the oven door

lockout is active or when the Self-Clean cycle feature is active.

Feature indicator

lights

— These lights

show which feature is

active.

Set clock pad

Used to set the time

of day.

Cancel pad

— Use

to clear any feature

previously entered

except the time of

day and minute

timer. Press 

Cancel

to stop cooking. Also

the 

Cancel 

pad is

used to activate

oven door lockout

setting.

Timer On/Off pad

Use to set or cancel

the minute timer. The

minute timer does not

start or stop cooking.

Also,

Timer On/Off

 pad is

used to set the

continuous bake

function.

Oven light pad

Use to turn the

interior oven light

ON or OFF.

Quick Bake™

 pad

activates the Quick

Bake™ feature.

Oven control 

(for all other models)

Summary of Contents for DGGF3032KB





























Reviews: