Section 3 Electronic Control
Gallery Series
3-8
Gallery Series Control Panel Layout
Operating Steps
1. Prepare items for drying.
2. Check that lint filter is clean and in place.
3. Load the dryer. If desired, add a dryer fabric softener sheet. Close the door.
4. Select the cycle and drying temperature for each load. To change the temperature, turn the TEMP knob to the
desired temperature.
5. A suitable drying temperature, dryness level and options will automatically be displayed for each cycle. To change
the temperature or dryness level, press TEMP or DRYNESS until the desired selection is made. To select an
option, press OPTIONS until the indicator for a desired option flashes, then press SELECT.
6. The changes you make will be remembered the next time that cycle is selected. See the “Dryer Settings Chart”
for more details.
7. Press START to begin the cycle.
• To pause the cycle or change settings, press PAUSE/CANCEL once. To resume the cycle, press START again.
• To stop or change the cycle, press PAUSE/CANCEL twice.
8. A signal will sound at the end of the cycle and periodically during Press Saver when the Cycle Signal option is
selected. When the cycle ends, remove items immediately and hang or fold.
9. Clean the lint screen after every load.
Cycle Selection
A suitable combination of drying temperature, dryness level and options will automatically be displayed for each cycle.
The settings can be changed before the cycle is started. Those adjustments will automatically be remembered each
time that cycle is selected. If a temperature, dryness level or option is not recommended for a cycle, the indicator will
not light. See the “Dryer Settings Chart” for more details.
If changes are attempted after the cycle starts, the status lights will blink and the signal will beep 3 times. The cycle
must be paused before the settings can be changed. Press PAUSE/CANCEL once to pause the cycle and change
settings.
User Interface Buttons
Cycle Selection Knob
LED Timer
Status
Indicators
Temperatures with
Light Indicators
Dryness Level with
Light Indicators
Dryer Features with
Light Indicators
Figure 3-7. Gallery Control Panel
Summary of Contents for Designer Series
