6
DRYER DOOR REVERSAL INSTRUCTIONS
5. Remove the hinge cutout plug. Rotate it and install it in the
opposite side of the outer door.
6. Remove the two screws that secure the hinge to the front
panel.
7. Remove the catch plate from the front panel.
8. Rotate and reinstall the hinge and the catch plate in the sides
opposite of where they were removed.
9. Reattach the door assemblies in reverse order.
10. Close the door.
Be sure to wear gloves while reversing the door assembly.
1
2
6
3
4
5
7
1.
Open the dryer door.
2.
Remove the five screws, 1 thru 5 and the two screws, 6 and
7, that attach the inner door assembly to the outer door
assembly. Lift the outer door assembly out of the inner
door assembly and place on a soft flat surface.
3.
Remove the two (2) hinge attachment screws and place the
inner door assembly on a soft flat surface.
4.
Remove the screws that attach the strike plate. Rotate the
strike plate and reattach it to the opposite side of the inner
door.
