CAUTION
If the water supply to your refrigerator
is softened, be sure the softener is
properly maintained. Chemicals from
a water softener can damage the ice
maker.
CAUTION
NEVER use an ice pick or similar sharp
instrument to break up the ice. This
could damage the ice bin.
To loosen stuck ice, use warm water.
Before replacing the ice bin, make sure
it is completely dry.
Cleaning the ice maker
Clean the ice maker and ice bin at regular
intervals, especially prior to vacation or
moving.
1. Turn off the ice maker.
2. Remove the ice bin.
3. Empty and carefully clean the ice
bin with mild detergent. Do not use
harsh or abrasive cleaners. Rinse
with clean water.
Ice maker tips
• The following sounds are normal
when the ice maker is operating:
- Motor running
- Ice dropping into ice bin
- Water valve opening or closing
- Running water
• Ice cubes stored too long may
develop an odd flavor. Empty the ice
bin as explained below.
Freeze Boost (Professional) or
Quick Freeze (Gallery) Function
Your refrigerator is equipped with a
Freeze Boost/Quick Freeze Function for
freezing food at a faster rate, but it can
also increase ice production. This function
terminates automatically after 12 hours.
This function affects only the ice maker
in the freezer
.
IMPORTANT
When removing or replacing the ice
bin, ensure that the ice bin is fully
seated before closing the freezer door.
If the ice bin is not positioned correctly
the refrigerator will not dispense ice.
The freezer door also may not close
properly causing warm air to leak into
the freezer compartment.
4. Allow the ice bin to dry completely
before replacing in the freezer.
5. Replace the ice bin. Turn the ice
maker on.
Remove and empty the ice bin if an
extended power failure (one hour or
longer) causes ice cubes in the ice bin to
melt and refreeze together after power is
restored.
Remove the ice bin and shake to loosen
the cubes or clean as explained above.
29
AUTOMATIC ICE AND WATER DISPENSER
NOTE
The Freezer Ice maker fills in the center
of the ice bin. Occasionally move the
ice to the borders to allow the bin to fill
completely.