background image

Air Conditioner Features

(continued)

ADDITIONAL THINGS YOU SHOULD KNOW

fan will continue to run during this time.

Now that you have mastered the operating procedure, here are more features in your control that you should become familiar 

with.

The “Cool” circuit has an automatic 3 minute delayed start if the unit is turned off and on 

   quickly.this prevents overheating of the compressor and possible circuit breaker tripping. The

   The control will maintain the set temperature within 2 

degrees Fahrenheit

, between 60F and 90F degrees.

   The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the 

   other and back, press and hold the “TEMP/TIMER” Up (   ) and Down (   ) buttons together for 3 seconds. 

  

EXHAUST CONTROL

This Exhaust Control allows the air conditioner to either recirculate inside air (CLOSED) or exhaust air to the outside (OPEN).

The CLOSED position is used when maximum cooling is desired. It may also be used for air recirculation without cooling 

when the air conditioner is set in any FAN position.

The OPEN position removes stale air from the room and exhausts it to the outside. Fresh air is drawn in through normal 

passages in the home.

4-WAY LOUVERS

The 4-Way air directional louvers allow you to direct air flow 

up or down, left or right throughout the room as needed.

closed

Exhaust

9

TO TURN UNIT OFF:

YOU WILL SEE:

DO THIS:

PRESS ON/OFF

BUTTON

Summary of Contents for 66121613












Reviews: