64
4.
Use the belt to raise rear of the drum to release the
ball from the hitch and move the drum out the front.
Removing the belt:
1.
Disconnect the dryer from electrical supply.
2.
Remove the top and the front panels.
3.
Release the belt from the motor.
4.
From the front, slightly raise the front of the drum and
slide the belt off.
2.
Push the idler pulley to the right and slip the belt off
the motor pulley.
Removing the vane from the drum:
1.
Disconnect the dryer from electrical supply.
2.
Open the door, remove the top panel, the two screws
holding the vane to the drum and drop the vane into
the drum.
Removing the drum:
1.
Disconnect the dryer from electrical supply.
2.
Remove the top and the front panels.
3.
Release the belt from the motor.
Summary of Contents for 27" Dryers with electronic controls
Page 32: ...32 UNDER COUNTER STACK MODELS ROUGH IN DIMENSIONS ...
Page 72: ...72 ...
