5
Air Conditioner Features
UNIT CONTROL
Key Features
(On some model)
LIGHT
ON/OFF
REMOTE CONTROL
ACTIVATES
TIMER
FAN
SPEEDS
SETS
MODES
ADJUSTS
TEMP &
TIMES
DISPLAYS
TEMPERATURE/TIME
FAN SPEED
ADJUSTS
TEMPERATURE
OR TIME
ACTIVATES
TIMER
CHECK FILTER
RESET BUTTON
SETS MODE
TURNS UNIT
ON OR OFF
AUTO COOL FEATURE
SLEEP MODE
SETS FAN SPEEDS
Multi-Step Fan and Cooling Speeds:
90 distinct fan settings give the ultimate in airflow and noise control.
Low Voltage Compensation:
Ensures aganist evaporator freeze-ups at low supply voltage conditions.
Operation of Current
Device
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating this appliance.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and
all its functions, then follow the symbol for the functions you desire.
The unit can be controlled by the
unit control alone or with the remote.
The power supply cord contains a current device that senses damage to the power cord. To test your
power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will
notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is also indi-
cated by a light on the plug head).
NOTES:
•
Do not use this device to turn the unit on or off.
•
Always make sure the RESET button is pushed in for correct operation.
•
The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or
it cannot be reset. A new one can be obtained from the product manufacturer.
•
If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one obtained from
the product manufacturer.
SZ000400(En)-Yaokong
12/10/2004, 5:36 PM
5
