![Frigelux CUBECV71A++ Instruction Manual Download Page 27](http://html1.mh-extra.com/html/frigelux/cubecv71a/cubecv71a_instruction-manual_2333510027.webp)
26
•
T
: This refrigerating appliance is intended to be used at ambient temperatures ranging from
16 °C to 38 °C
•
ST
: This refrigerating appliance is intended to be used at ambient temperatures ranging from
16 °C to 43 °C
Your appliance is in class
N-ST
Avoid locating your freezer near a heat source, eg, cooker, boiler or radiator. Also, avoid direct
sunlight in out-buildings or sun lounges. If you are placing your freezer in an out-building such as a
garage or annex ensure that the Freezer is placed above the damp course, otherwise condensation
will occur on the cabinet. Never place the freezer in a wall recessed or into fitted cabinets or fumiture
when your freezer is working, the grille at the back may become hot and the sides warm. It must
therefore be installed so that the back of the freezer has at least 9cm of free space and the sides
have 2 cm.
Do not drape the freezer with any covering.
Leveling the freezer
If the freezer is not level, the door and magnetic seal alignment will be affected and may cause you
freezer to work incorrectly. Once the freezer is placed in its final location, adjust the leveling feet at
the front by turning them.
Cleaning before use
Wipe the inside of the freezer with a weak solution of bicarbonate of soda. Then rinse with warm
water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy water and dry
completely before replacing in the freezer.
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the freezer.
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FREEZER.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30 minutes
before switching back on to allow the coolant fluid to settle.
Before filling your freezer
Before storing foods in your freezer, turn the freezer on and wait for 4 hours, to make sure it is
working properly and to allow the freezer to fail to the correct temperature.
3. OPERATING YOUR APPLIANCE
Temperature Control
Appliance thermostat has 7 settings. The appliance assures that temperature is maintained as long
as it is in operation and that it is used in normal conditions of use. The temperature inside the
appliance can be influenced by many factors : ambient temperature, sun exposure, number of door
opening and amount of food stored… The slight changes in temperature are perfectly normal.
The temperature control knob of your appliance is located at the bottom, inside the appliance.
The first time you put your appliance into operation, set the thermostat to "MAX" and let it run empty
for 4 hours before storing food for it to cool sufficiently.
The range of the temperature control is from position" MIN" the warmest to "MAX" the coldest. Adjust
the temperature control to the setting that best suits your needs. The intermediate setting should be
appropriate for home or office freezer use.
To turn the freezer off, turn the temperature control to
“OFF”
.
Summary of Contents for CUBECV71A++
Page 31: ...30 ...