EN
16
8. Some ingredients require shaking halfway through the preparation time (see section ’Settings’). To shake
the ingredients, pull the pan out of the appliance by the handle and shake it. Then slide the pan back into
the air fryer and continue to cook.
Caution: Do not press the button of the handle during shaking.
Tip:
To reduce the weight, you can remove the basket from the pan and shake the basket only. To do so,
pull the pan out of the appliance, place it on a heat-resistant surface and press the button of the handle.
Tip:
If you set the timer to half the preparation time, you hear the timer bell when you have to shake
the ingredients. However, this means that you have to set the timer again to the remaining preparation
time after shaking.
Tip:
If you set the timer to full preparation time, there is no timer bell during cooking before finishing, you
can pull out the pan at any time to check the ingredients cooking condition, the power will shut down
automatically and resume after slide the pan back into the appliance.
9. When you hear the bell, the set preparation time has elapsed. Pull the pan out of the appliance and place
it on a heat-resistant surface.
Note:
You can also switch off the appliance manually. To do this, press the touch, or press the
«-»touch nearby the timer to reduce the time to 0, or pull out the pan directly.
10. Check if the ingredients are ready.
If the ingredients are not ready yet, simply slide the pan back into the appliance and set the timer to a
few extra minutes.
11. To remove small ingredients (e.g. fries), press the basket release button and lift the basket out of the pan.
Do not turn the basket upside down with the pan still attached to it, as any excess oil that has collected
on the bottom of the pan will leak onto the ingredients.
After hot air frying, the pan and the ingredients are hot. Depending on the type of the ingredients in the
air fryer, steam may escape from the pan.
12. Empty the basket into a bowl or onto a plate.
Tip:
To remove large or fragile ingredients, use a pair of tongs to lift the ingredients out of the basket
13. When a batch of ingredients is ready, the air fryer is instantly ready for preparing another batch.
SETTINGS
This table below helps you to select the basic settings for the ingredients you want to prepare.
Note:
Keep in mind that these settings are indications. As ingredients differ in origin, size, shape as well as
brand, we cannot guarantee the best setting for your ingredients.
Because the rapid hot air technology instantly reheats the air inside the appliance, pulling the pan briefly out
of the appliance during hot air frying barely disturbs the process.
BEFORE FIRST USE
PREPARING FOR USE
USING THE APPLIANCE
1. Remove all packaging material.
2. Remove any stickers or labels from the appliance.
3. Thoroughly clean the basket and pan with hot water, some washing-up liquid and a non-abrasive sponge.
Note:
You can clean these parts in the dishwasher.
4. Wipe the inside and outside of the appliance with a moist cloth.
This is an air fryer that works on hot air. Do not fill the pan with oil or frying fat.
1. Place the appliance on a stable, horizontal and level surface.
Do not place the appliance on non-heat-resistant surfaces.
2. Place the basket in the pan properly
Note:
the basket MUST be put into the appliance properly, otherwise the appliance doesn’t work!
3. Pull the mains cord and plug into the earthed wall socket.
Do not fill the pan with oil or any other liquid.
Do not put anything on top of the appliance.
Do not put anything on the air-inlet on the two sides of the appliance, this disrupts the
airflow and affects the hot air frying result.
The SimplyFry can prepare a large range of ingredients. Please refer to the section “settings” hereinafter.
HOT AIR FRYING
1. Put the mains plug into an earthed wall socket.
2. Carefully pull the pan out of the air fryer.
3. Put the ingredients in the basket.
Note:
Never fill the basket in full or exceed the recommended amount (see section ‘Settings’), as this
could affect the quality of the end result.
4. Slide the pan back into the air fryer properly.
Never use the pan without the basket in it.
If the pan doesn’t be fixed into the air fryer properly, the appliance won’t work!
Caution: Do not touch the pan during and some time after use, as it gets very hot. Only
hold the pan by the handle.
5. Switch on the appliance, press the touch, to switch off the appliance, press the touch or press the
«-»-touch nearby the timer to reduce the time to 0.
6. Press the «M»touch to select the program of your choice according to your ingredients
7. Determine the required preparation time and temperature in accordance with the quantity-.Press the
touch to launch the program.
a. The fan icon light goes on and blinks. it means that the SimplyFry is working.
b. The timer starts counting down the set preparation time.
c. Excess oil from the ingredients is collected on the bottom of the pan.
Fri_FSF34C_ME_V2.indd 16
27/11/17 16:17
