Friendly Robotics Friendly Vac, Operating & Safety Manual

Page: 19 / 24

Display Messages
(continued)
Display
Message
What it means What you should do
E8 Moisture detected in air path.
- The Friendly Vac has picked up a liquid.
- Dry out Friendly Vac, including dirt cup and
filter, thoroughly.
E9
Elevation problem
Elevation motor is stuck in place
Using the rear portion of the Friendly Vac, tilt
the Friendly Vac onto its back and visually
check the elevation motor to see if there is
something stuck in the elevation which can be
removed
E10 Unauthorized version
This message is received when trying to
burnt/copy software version, which in not
released or not compatible to the Friendly
Vac.
E11
All other stuck reasons
This message is displayed in case, which
the failure is not identified as one of the
other error codes messages (E1 to E10)
In every stop of the Friendly Vac with error
message (E code) place the cleaning mode
selector to OFF and press and hold the two
scroll buttons for at least 3 seconds until the
‘Stop cause number’ is displayed.
Refer to paragraph 5 ‘ Diagnostics and
Settings’ for more details about the stop cause.
17