62
PB
INSTALLATION
Alternate Wall Installations
7
NOTE:
Follow all wall system manufacturer installation instructions. For sunrooms and modular buildings, adhere to their installation instructions for
supporting and sealing sleeve to their frames. All wall and window/wall installations must provide for proper drainage. In applications where the
drain holes on the PTAC wall sleeve are not exposed beyond the wall an internal drain system is recommended. It is the installer's responsibility
to ensure there is adequate drainage for the PTAC unit.
Alternate Wall Installations
FRP003
OPTIONAL SUBBASE
LEVELING SCREW
Figure 4
Panel Wall
FRP004
CASE FLANGE
(BY OTHERS)
WALL OR
WINDOW
1/4" MIN
PROJECTION
OPTIONAL SUBBASE
LEVELING SCREW
Figure 6
Curtain Wall
FRP005
1/4" MIN
PROJECTION
OPTIONAL SUBBASE
LEVELING SCREW
WOOD FRAME
STEEL
LINTEL
11" MIN.
WITH SUBBASE
FRP006
1/4" MIN
PROJECTION
STEEL
LINTEL
FINISHED FLOOR
POWER SUPPLY CONDUIT
(SUPPLIED BY INSTALLER)
RECEPTACLE
CONCRETE LINTEL
13-3/4" MIN.
WITHOUT SUBBASE
Figure 5
Frame and Brick Veneer
Figure 7
Block and Brick Veneer
