22
4. Put wiring cover back and then tighten the screw.
5. Close the panel.
3. Remove the wire clip; connect the power connection wire to the wiring terminal
with wire clip.
N(1) 2
3
blue
brown
black
yellow-
green
Outdoor unit connection
18
,
24K indoor unit:
Installation of indoor unit
Note:
● All electrical connections must be completed by a qualified professional.
● If required by local code install circuit breaker inline. Must be 3-Pole.
power connection
wire
cable-cross
hole
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
Notice before installation
1. How to install the over line pipe(According to the direction as show.)
2. Finish(According to the direction as show in right figure.
wire pipe
Fixed nut
Screw
