DUCTLESS SPLIT SYSTEMS
Ductless splits are an innovative and efficient alternative to
window and thru-the-wall units. They have the benefits of a
central system, without the difficulty and expense of installing
ductwork.
Easy to install
Friedrich ductless split systems have the
advantages of a ducted installation without
the high material and labor costs. Absolutely
no ductwork is required, so most systems
can be installed and running in a few hours.
SEER ratings up to 20.0
All Friedrich ductless models exceed the
federal 13.0 SEER requirements. And, a full
one-third of our models have super high
ratings ranging from 16.5 to 20.0 SEER.
Extremely quiet
Ductless systems keep the operating noise
of the condensing unit outdoors, while
the blower fan of the indoor unit remains
whisper quiet.
Zone cooling flexibility
Independently condition up to 4 separate
rooms using only a single outdoor unit.
Achieve the ultimate in comfort and energy
control by cooling and heating only the
rooms that are in use.
TECHNOLOGY
INVERTER
setpoint
Initial
startup
2nd
startup
3rd
startup
1st
shutdown
2nd
shutdown
Inverter Technology
Standard Technology
Standard Energy Usage
Inverter reaches
setpoint faster, then
adjusts capacity as
required to maintain
accurate temp
Inverter Energy Usage
All Friedrich units feature advanced
inverter technology
Inverter technology lets you reach the desired
temperature faster, maintain it more accurately, and
reduce energy costs. Inverter technology varies the
compressor and condenser and indoor fan
speeds, eliminating constant compressor start-
ups/shut-downs that traditional technology
requires to maintain the set temperature.
Like a central system, without the ductwork.
electric wiring
refrigerant lines
OutdOOr cOndenser
transfers heat to the outdoors.
Compact unit can be placed
at ground level, hung on an
outside wall or placed on the
roof of a building
hard-wired
IndOOr unIt
converts warm indoor air to
cold indoor air, conditioning
and dehumidifying the
room while filtering the air.
Unit is mounted high on
the wall.
reFrIGerAnt LInes And
eLectrIcAL
pass through
a 3” wall opening and run
along the exterior of the
building to the condensing
unit. Electrical hard-wiring
is required.
The ultimate room air conditioner.
Easy to install. Exceptionally quiet.
Totally flexible.
