Rittal LED light strip
9
5 Installation
EN
Power in
24VDC
max. 2A
RJ12/RS232
RJ45
RJ45 CAN-Bus
Power in 2
+
-
relay
NC N0 C
DI
DI
2
1
+
-
+
-
+
-
24VDC
24VDC
CMC III Power Supply 7030.060
CMC III PU 7030.000
2
1
3
3
4
4
1
2
5
6
- B
- G
- R
+24 V DC
Fig. 2:
Alarm relay application circuit diagram
Legend
1
LED light strip (+24 V DC) supply, black connection wire
2
Red LED, (Gnd) red connection wire
3
Green LED, (Gnd) grey connection wire
4
Blue LED, (Gnd) blue connection wire, not connected in the application example
5
CMC III power pack 7030.060
6
CMC III Processing Unit (DK 7030.000, DK 7030.010)
+
-
+
-
+
-
24VDC
24VDC
CMC III Power Supply 7030.060
5
6
2
1
3
4
2
1
4
3
- B
- G
- R
+24 V DC
Fig. 3:
White continuous illumination application
Legend
1
LED light strip (+24 V DC) supply, black connection wire
2
Red LED, (Gnd) red connection wire
3
Green LED, (Gnd) grey connection wire
4
Blue LED, (Gnd) blue connection wire
5
CMC III power pack(DK 7030.060)
6
Intermediate clamp
5.4 Connection of the LED strip
◾ Connect the individual plugs depending on the
application in accordance with the associated circuit
diagram to the appropriate components (power
pack, CMC III PU, I/O unit).
5.5 Assembly
Four magnets are mounted on the rear of the LED strip.
The mounting is performed by simply placing the LED
strip at the desired position inside the rack.
Note:
The magnetic fastening is not suitable for
transportation when in the rack. Always use
the original packaging for transportation.
The LED strip may only be transported with
this packaging in the rack.
A drill hole with M4 thread for the potential equalisation
is located at the lower end of the LED strip.
