Rittal CMC III Access Control
9
5 Installation
EN
Fig. 3:
Attaching the sensor to the bracket
◾ Move the sensor sideways slightly on the bracket so
that it latches into place.
Fig. 4:
Latching the sensor into place on the bracket
◾ Fasten the bracket, including Access Control, at the
desired position in the enclosure or the IT enclosure
by making a quarter-turn of the connector.
Fig. 5:
Mounting the sensor in the enclosure or IT enclosure
◾ Optionally secure the bracket using the two screws
included in the scope of delivery.
Fig. 6:
Optional securing of the bracket
5.3.3 Installation with the provided bracket on a
system chassis
The provided bracket is used for installation on a sys-
tem chassis.
◾ Place the Access Control on the bracket from above
and latch it similar to the installation on the enclosure
frame.
◾ Fasten the bracket, including Access Control, at the
desired position in the enclosure on the system chas-
sis by making a quarter-turn of the connector.
Fig. 7:
Fastening the sensor to a system chassis
◾ Also
always
secure the bracket with the two provid-
ed bolts.
5.3.4 Installation on a top-hat rail
The sensor can also be mounted on a top-hat rail using
the bracket along with the spring clip included in the
scope of delivery.
◾ First screw the bracket onto the spring clip provided
for installation on a top-hat rail.
◾ Then place the Access Control on the bracket and
latch it into place.
