Rittal CMC III Access Control
5
2 Safety instructions
EN
2
Safety instructions
2.1 General safety instructions
Please observe the subsequent general safety instruc-
tions for the installation and operation of the system:
– Use only original Rittal products or products rec-
ommended by Rittal in conjunction with the Access
Control.
– Please do not make any changes to the Access
Control that are not described in this manual or in the
associated manuals.
– The operating reliability of the Access Control is only
warranted in case of use as intended and according
to the rules. The technical specifications and limit
values stated must not be exceeded under any cir-
cumstances. In particular, this applies to the specified
ambient temperature range and IP degree of protec-
tion.
– The Access Control must not be opened. The unit
does not contain any parts that need servicing.
– Operating the system in direct contact with water,
aggressive materials or inflammable gases and va-
pours is prohibited.
– Other than these general safety instructions, ensure
you also observe the specific safety instructions
when the tasks described in the following chapters
are performed
REACH safety information in accordance with
Regulation (EC) No 1907/2006
– The product contains the SVHC "Lead – CAS
no. 7439-92-1".
– The manufacturer specifies that no health risks of any
kind arise during use of the product when handled
properly.
– After use, the product must be disposed of properly
in accordance with the applicable statutory regula-
tions.
2.2 Service and technical staff
– The mounting, installation, commissioning, mainte-
nance and repair of this unit may only be performed
by qualified mechanical and electro-technical trained
personnel.
– Only properly instructed personnel may work on a
unit while in operation.
