![FRIEDHELM LOH AS 4050.452 Operating Instructions Manual Download Page 14](http://html1.mh-extra.com/html/friedhelm-loh/as-4050-452/as-4050-452_operating-instructions-manual_2332661014.webp)
6 Maintenance
14
We reserve the right to make technical modifications.
Rittal Crimping machine L8
EN
Depending on the strength and thickness of the insulation, the cam must be ad-
justed in the "+" or "
–
" direction.
◼
To cut less, move the cam in the "+" direction; to cut more, move the cam in the
"
–
" direction.
Fig. 5:
Insulation stripping module
6
Maintenance
Warning!
Electrical shock caused by working on live components!
◼
Disconnect the mains plug and separate the machine from the
pneumatic network.
6.1
Maintenance notes
Note:
–
The manufacturer recommends that a customer service is per-
formed on the machine every 400,000 cycles.
–
Never clean the machine interior with compressed air.
–
Do not use spray oil or spray grease.
–
If possible, use silicone or PTFE oils (Teflon oil).
–
Use lubricating greases suitable for roller bearings and sliding sur-
faces.
–
The display and the touch screen are made of plastic and must not
come into contact with hard objects. The touch-screen surface can
be cleaned with a soft cloth without any solvents.
6.2
Daily maintenance
Emptying the stripped insulation scrap container
◼
Open the front panel.
◼
Withdraw and empty the stripped insulation scrap container.
◼
Reinsert the container.
◼
Close the front panel.
Cam