5 Tools
12
We reserve the right to make technical modifications.
Rittal Crimping machine L8
EN
40 mm
Correct
Incorrect
Correct
Inclined cut
Incorrect
Protected
conductor
Pulled-out
conductor
Crushed
conductor
Recessed
conductor
Tab. 1:
Conductor insertion / conductor cutting
5
Tools
5.1
Ferrule feed
The ferrule feed consists of the vibrating conveyor upper part, the separating unit
and the feed pipe.
◼
Loosen the screw in the middle of the vibrating conveyor upper part, turn it
counter-clockwise and raise it for changing.
◼
To set the separating unit, pull the button upwards and turn.
◼
Fasten the vibrating conveyor upper part again.
◼
Fill the wire end ferrules.
◼
Call program 2 "Vibrating conveyor power".
◼
To load the infeed belt: press the
key until the required power of the vibrating
conveyor is attained and keep pressed.
After releasing the key, the power returns to the stored value.
◼
Set the feed speed so that an adequate supply with ferrules is guaranteed.
The first wire is only stripped of its insulation.
Wire end ferrule
Vibrating conveyor (VC)
upper part
Separating unit
0.5 / 8 N
1
0.5
0.5 / 8 S
1
0.75
–
1.0
0.75 / 8 N
1
0.75
–
1.0
0.75 / 8 S
1
0.75
–
1.0
