page
14
page
3
»
Tools Needed
WARNING:
FAILURE TO FOLLOW THE ASSEMBLY INSTRUCTIONS IN THIS
MANUAL CAN RESULT IN PRODUCT DAMAGE, OR PERSONAL INJURY.
1
2
1. Read instructions
carefully. Check that
no parts are missing.
Single Sided
Wrench
Socket Head
Wrench
Electric Drill
Friant & Associates, LLC does not assume any responsibility for product that is altered in any way.
2. Carefully identify each
component, especially
those that are similar.
The most common
mistake is mixing
up the order and
placement of parts.
Tools Needed
Follow assembly instructions closely
Do not overload the tables (220 lbs maximum straight, 330 lbs maximum
corner)
The input voltage should be within 108-132V
Use the glides to properly level the table before use
When moving the table, do not tilt the table on one leg or misalignment may
occur
Before first use, perform reset operation
If, after trouble shooting the problem persists, contact Customer Service for
further assistance.
GENERAL TIPS
