2
IMPORTANT: When placing table in final location, be sure there is
ample room for adjustment around ALL sides, and at the highest (50”)
and lowest (24.5”) points the table can reach. Make sure table will not
come into contact with any fixed objects (fixed tops, storage, shelving,
etc.) while adjusting.
Introduction
Friant offers a comprehensive line of office furniture for every space and requirement,
now including My-Hite, a height adjustable table that allows for standing or sitting
while working.
User Notes
1. As with all power-operated products, please follow instructions closely and handle
with care.
2. When moving My-Hite tables, please lift the tables, do not drag or tilt the table on
one leg as misalignment may occur
3. Check that the load on the table does not exceed limits (220lbs maximum on
straight, 330lbs maximum on corner).
4. The input voltage should be within 108-132V
5. Use the glides to properly level the table before use.Table should be level and aligned
at all times.
6. Before first use, perform reset operation.
7. If, after trouble shooting the problem persists, contact Customer Service for further
assistance.
Thank you for choosing Friant. We appreciate the trust and
confidence you have placed in us and are committed to providing you
the best possible product.
WARNING
: Failure to follow the assembly instructions in this manual
can result in product damage, or personal injury.
1
2
1. Read instructions
carefully. Check that no
parts are missing.
Single Sided
Wrench
Socket Head
Wrench
Electric Drill
Friant & Associates, LLC does not assume any responsibility for product that is altered
in any way.
2. Carefully identify each
component, especially
those that are similar.
The most common
mistake is mixing
up the order and
placement of parts.
Tools Needed