Page 5
Installation Manual TG 50m/110m/330m/550m form 9123654 rev. 04/2006
INSTALLATION PROCEDURES
•
Unpacking of the unit.
•
Remove the pallet under the unit. (The TG 50 and 100 can be lifted of by hand).
•
Put the unit on his location.
•
Check if there is enough free space around the unit (see installation drawing).
•
Check the electrical supply.
•
Make a test run on 482°F.
•
Give instructions to the operator.
UNPACKING THE UNIT
Immediately after unpacking the oven, check for possible shipping damage. If the oven is found to
be damaged, save the packaging material and contact the carrier within 15 days of delivery.
REMOVAL OF PALLET
The models TG 50 and TG 110 can be lifted
from the pallet by hand.
For the models TG 330 and 550 you can disas-
semble the pallet. Follow the procedure on the
photo.
