Fri-Jado TDR auto-clean Series, Service Manual

Page: 75 / 134

TROUBLE SHOOTING
Page 75
Service Manual TDRac
PKII
USA form 9120931 rev. 09/2022
Descrip-
tion of part /
function Symptoms Possible cause Action
Inside door Broken glass Slamming of door. Give instruction to operator.
Fastening bolts and nuts
are loose. Tighten all fastenings.
No PTFE ring between
steel and glass. Mount new door.
Door does not
properly open /
close Door not well adjusted. Adjust outside and inside door
Outside door Broken glass Slamming of door. Give instruction to operator.
Fastening bolts and nuts
are loose. Tighten all fastenings.
Door adjustment Door not well adjusted. Adjust outside and inside door
Heating ele-
ment Rotisserie doesn’t
reach adjusted
temperature Wiring. Check the wiring.
Check the power on the element.
Contactor Check the contactor
Element malfunction. Check the current with AC current tester.
Duration of gril-
ling time is too
long Wiring. Check the wiring.
Element malfunction. Check the current with AC current tester.
Safety ther-
mostat Contactor does
not switch on
after starting of
program Wiring. Check the wiring.
Thermostat malfunction. Check if the thermostat is making contact.
Contactor swit-
ches off before
reaching the ad-
justed tempera-
ture in program Thermostat malfunction. Check if the thermostat is turned fully
clockwise (contact closed).
Thermostat probe not in
right position. Check the position of the thermostat probe.
Contactor Contactor
doesn’t switch on Wiring. Check the wiring.
Coil malfunction. Check resistance of the coil. This should be ±
600Ω.
Contactor swit-
ches on, but
no power on
lamp or heating
element. Contact burned. Check the wiring.
Check the power on al contacts.
Check the contacts of the contactor.
Capacitor Drive motor or
blower don’t
work Wiring. Check the wiring.
Capacitor malfunction. Check function after connecting a new capa-
citor.
Checking of capacitor:
See chapter “electrical tests”
TROUBLE SHOOTING BY PART / FUNCTION.