TDR s auto-clean
EN
15 / 32
4.3.3 Loading the rotisserie using meat baskets (accessory)
If you are using meat baskets, act as follows:
•
With the TDR 5 you must stick the ends of the meat baskets through the appropriate holes
of the rotor disks.
•
With the TDR 7 and TDR 8 you must attach the meat baskets to the appropriate pins.
(type for TDR-8 is shown)
•
Whilst loading the unit with meat baskets, you must see to it, that the rotor gets evenly
loaded, so that the mass of the products is evenly spread over de rotor, causing an equal
balance.
•
Also see to it that no meat parts are sticking out of the baskets.
4.3.4 Loading the rotisserie using two different accessories
WARNING
After loading the rotor, at least make ONE full rotation, and check whether the rotor
can spin without obstructions.
If you want to load the unit using two different accessories at the same time, always fill the rotor
with ONE accessory fewer than the maximum allowed quantity. See to it that accessories of the
same type are placed consecutively.
Example:
4 meat forks + 3 meat baskets consecutively.
Summary of Contents for TDR 5 s AC
Page 29: ...TDR s auto clean EN 29 32 Notes ...
Page 30: ...TDR s auto clean EN 30 32 Notes ...
