Removal and replacement of parts
Page 8
Service Manual Multi Deck 60 UK form 9123765 rev. 12/2008
SENSOR DANFOSS THERMOSTAT
1. Remove the thermostat according prior
procedure.
2. Remove the back insu
cover panel.
3. Remove the panels on the bottom side.
4. Remove the holder with sensor (use a drill
of 3.2 mm.)
5. Remove the screws on the front panel and
remove this panel.
6. lead sensor through the grommet and
lead the sensor to the back side.
7. Reverse the procedure to install.
Note: See to it that the sensor is placed
straight inside the chamber.
