Removal and replacement of parts
Page 12
Service Manual Multi Deck 60 UK form 9123765 rev. 12/2008
Replacing a side glass in the MD
Remove all traces of glass and silicone past.
Remove the product stopper from the bottom
plate.
Take out the honeycomb profile and retainer.
Remove the bottom plate.
The attachment brackets are visible.
Remove the six screws from the top plate.
Remove the top plate.
Remove the insulation plates.
The attachment brackets are visible.
Remove the old notches that were glued to the
glass by taking them from the attachment
brackets.
Use two spanners to proceed as follows:
Hold nut B with one spanner.
Detach nut A with the other spanner.
Remove the brackets and the old notches.
REPLACING SIDE GLASS
