manualshive.com logo in svg

Fri-Jado LDR 8s AC Gas, Service Manual

Share
Download
Fri-Jado LDR 8s AC Gas Service Manual Download Page 8

LDR 8s ac Installation

Page 8

Service  Manual LDR 8s AC

PKII

    form 9120934 rev.  02/2022

INTRODUCTION

• 

Unpacking of the unit.

• 

Remove the pallet under the unit with the help of a fork lift.

• 

Put the unit on his location. 

• 

Check if there is enough free space around the unit (see installation drawing).

•    Check the electrical supply.
•    Tethering of the unit.
•  

Connect the water. 

•    Connect drain.
•    Grease collection.
• 

Make a test run on 220 °C (425°F).

• 

Give instructions to the operator.

UNPACKING THE UNIT

Immediately after unpacking the oven, check for possible shipping damage. If the oven is found to 
be damaged, save the packaging material and contact the carrier.
The standard way to remove the oven from a pallet is with a fork lift.

The alternative way is explained on the next page. 

Pictures may differ a little form reality and package might be from wood.

Do this with at least 2 people.

Dispose the packagaging according local legislation..

Summary of Contents for LDR 8s AC Gas























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands