Putting the new glass in place
Attach all nuts B by hand.
Hold nut B in position using a spanner.
Tighten nut A firmly using a spanner.
Put the insulation plates in the top !
Apply the top plate.
Thoroughly clean the side and remove any
traces of fat.
Glue a piece of foam of 1/8". (X) on the top
side.
Apply silicone paste following the pattern as
shown in above picture.
Position the notches which are glued to the
glass in the holes.
Put the brackets on the threaded studs.
Put the screws in the top plate
Put the bottom plate in the unit.
Position the honey comb profile with the
retainer in the opening.
Place the product stopper in the channel in
the bottom plate.
X
SERVICE MANUAL MULTI DECK 60/100/120 / CLASSIC DECK FORM 9123661 REV. 10/2015
Page 15
REMOVAL AND REPLACEMENT OF PARTS
