Page 10
SERVICE MANUAL MULTI DECK 60/100/120 / CLASSIC DECK FORM 9123661 REV. 10/2015
REMOVAL AND REPLACEMENT OF PARTS
1. Remove the thermostat according prior
procedure.
2. Remove the back insu
cover panel.
3. Remove the panels on the bottom side.
4. New version: Remove the holder with sen-
sor (use a drill of 3.2 mm.)
Old version: Remove the clip on the sen-
sor and remove the sensor.
5. Remove the screws on the front panel and
remove this panel.
6. Lead sensor through the grommet and
lead the sensor to the back side.
7. Reverse the procedure to install.
Note: See to it that the sensor is placed
straight inside the chamber.
SENSOR DANFOSS THERMOSTAT
1. Remove honeycomb profile and bottom
shelf.
2. Remove the electric panel according prior
procedure.
3. Remove all panels on the bottom side +
the back panel on bottom side and the
cover plate on the field wiring box accor-
ding prior procedures.
4. Remove the wiring on the connection
block.
5. Remove the bolts on the inside and remo-
ve the blower.
6. Reverse the procedure to install.
BLOWER AIR CURTAIN
