INSTALLATION PROCEDURES
Page 6
Installation Manual Bakery Multisserie form 9123780 rev. 02/2008
Prior to installation, test the electrical service to assure that it agrees with the specifications on the
machine data plate located on the right side panel near the controls. The connecting cable must be
connected to a manual disconnect switch that is installed near the unit in a clear visible manner. also
refer to the local codes.
For a 3-phase 208 V / 120 V~ circuit, the unit must be connected according to the figure below.
ELECTRICAL SUppLy
IMpORTANT:
Make sure you leave
sufficient space around the oven
to easily remove or insert the meat
baskets or chicken racks. The floor
on which the multisserie rests must
be level.
LOCATION
The oven must be installed on a level surface. The installation location must allow adequate clearances
for servicing and proper operation.
31”
