Fresh'n Squeeze Produce Plus, Operator'S And Service Manual, Page: 17 / 42

John Bean Technologies Corporation Produce Plus Juicer Operator & Service Manual 17
CLEANING INSTRUCTIONS
4. a. With both hands lift hopper up and out, with plastic feed screw in it.
b. Remove juice collector pan.
CAUTION: TEETH ON GRATER ARE SHARP.
c. Remove screen assembly; remove large pieces of product from inside of screen
and place into waste container.
d. Remove Hefty® Cinch Bag from hooks; then, remove waste container.
e. Remove juice reservoir and fill shelf.
5. If possible, hose down inside and outside of Juicer with hot drinking water; if not, with
waste container in place, sponge or spray juicing area with cleaning solution. Rinse
with hot drinking water. Be sure to clean stainless steel drive gear. Wipe dry.
6. With a hose or spray nozzle, rinse off all juicing components with clean hot water.
A hard spray on screen assembly will remove all stuck product. Make sure to
remove plastic feed screw from hopper.
7. Prepare a cleaning solution of clean hot water and "Cascade®" dish washing
detergent in a sink or large container. Use three ounces to one gallon of water.
8. Use brush provided to scrub all juicing components in the solution; (never use a wire
brush). Pay particular attention to cleaning the screen and grater plate. Be careful,
the grater teeth are sharp. If stains are not easily removed, allow juicing components
to soak for ten minutes or longer.
9. Rinse all juicing components with clean hot water; then, thoroughly rinse with
sanitizer solution per manufacturer's mixing directions and safety precautions. Allow
to air dry.
10. Re-assemble Juicer per assembly instructions.