4
2
Install UV Lamps
Snap
UV Lamps
into the
Lamp Clamps
. Be sure to clamp to the
rubber lamp connector on one end and the ceramic lamp tip on the
other end.
DO NOT
clamp onto the lamp glass.
Use
Black Nylon
Zip-Ties
to secure lamp cables to rack components and/or supports.
3
Mount Power Supply(s)
Mount the power supply in a location (inside or outside of the HVAC
system) that is convenient for access to the main power supply
and for connection to the UV lamps. The power supply is weather
resistant and is suitable for mounting inside or outside of the air
handler. An
Optional
Power Supply Panel Mount
(part # TUVC-P) is
available for mounting two or more power supplies.
1.
Use the supplied self-taping sheet metal screws to mount the
power supply in place through the mounting holes on the sides
of the base. It is recommended to use wire boxes, our
Optional
3/4” or 1” Cable Strain Relief
, or other sealing methods in order
to pass the power cord and lamp cables into the interior of the air
handler for connections.
2.
IMPORTANT! Turn off main power before making electrical
connections
. Refer to the
Electrical Diagram
for proper
connection of the power supply to the main power.
Electrical Diagram
UV LAMP
UV LAMP
120-277 VAC
POWER SUPPLY
L1 BLACK
CONNECTORS
L2 or N WHITE
GND GREEN
IMPORTANT! Connect in accordance with all state and local
electrical and building codes.
Proper voltage is automatically
selected by the unit between 120–277 VAC Single Phase 50/60 hz.
IMPORTANT! An external power suppressor is suggested if
power surges occur often.
3.
Use of
Optional Door Interlock Switches
is highly recommended
to prevent accidental exposure to UV Light. Interlock switches are
mounted on the access panels and doors so the UV lights turn off
when the entryway is opened.
4.
Use the
Optional UV Output Monitor
, to monitor and alert
maintenance personnel when UV lamps should be replaced.
TRIATOMIC ENVIRONMENTAL
WWW.FRESHAIREUV.COM
ETL LISTED
CERTIFIED TO
CAN/USA STD
C22.2 NO. 250.0
3 0 3 2 7 8 2
CONFORMS TO UL STANDARD 1598
Made in USA
TUVCP-1S-I
SINGLE LAMP
TUVCP-1D-I
DUAL LAMP
TUVCP-1T-I
TRIPLE LAMP
TUVCP-1Q-I
QUAD LAMP
Current: 0.94 A/120V Thru 0.40 A/277V
Current: 1.88 A/120V Thru 0.80 A/277V
Input Power: 120-277 VAC 50/60 Hz
UV WARNING!
PROTECT EYES FROM UV LIGHT
TURN OFF UNIT OR
DISCONNECT POWER
BEFORE SERVICING
TRIATOMIC ENVIRONMENTAL
WWW.FRESHAIREUV.COM
ETL LISTED
CERTIFIED TO
CAN/USA STD
C22.2 NO. 250.0
3 0 3 2 7 8 2
CONFORMS TO UL STANDARD 1598
Made in USA
TUVCP-1S-I
SINGLE LAMP
TUVCP-1D-I
DUAL LAMP
TUVCP-1T-I
TRIPLE LAMP
TUVCP-1Q-I
QUAD LAMP
Current: 0.94 A/120V Thru 0.40 A/277V
Current: 1.88 A/120V Thru 0.80 A/277V
Input Power: 120-277 VAC 50/60 Hz
UV WARNING!
PROTECT EYES FROM UV LIGHT
TURN OFF UNIT OR
DISCONNECT POWER
BEFORE SERVICING
TRIATOMIC ENVIRONMENTAL
WWW.FRESHAIREUV.COM
ETL LISTED
CERTIFIED TO
CAN/USA STD
C22.2 NO. 250.0
3 0 3 2 7 8 2
CONFORMS TO UL STANDARD 1598
Made in USA
TUVCP-1S-I
SINGLE LAMP
TUVCP-1D-I
DUAL LAMP
TUVCP-1T-I
TRIPLE LAMP
TUVCP-1Q-I
QUAD LAMP
Current: 0.94 A/120V Thru 0.40 A/277V
Current: 1.88 A/120V Thru 0.80 A/277V
Input Power: 120-277 VAC 50/60 Hz
UV WARNING!
PROTECT EYES FROM UV LIGHT
TURN OFF UNIT OR
DISCONNECT POWER
BEFORE SERVICING
TRIATOMIC ENVIRONMENTAL
WWW.FRESHAIREUV.COM
ETL LISTED
CERTIFIED TO
CAN/USA STD
C22.2 NO. 250.0
3 0 3 2 7 8 2
CONFORMS TO UL STANDARD 1598
Made in USA
TUVCP-1S-I
SINGLE LAMP
TUVCP-1D-I
DUAL LAMP
TUVCP-1T-I
TRIPLE LAMP
TUVCP-1Q-I
QUAD LAMP
Current: 0.94 A/120V Thru 0.40 A/277V
Current: 1.88 A/120V Thru 0.80 A/277V
Input Power: 120-277 VAC 50/60 Hz
UV WARNING!
PROTECT EYES FROM UV LIGHT
TURN OFF UNIT OR
DISCONNECT POWER
BEFORE SERVICING
Optional Power Supply Panel Mount
4
Connect Lamps & Cables
Arrange cables as needed for installation. If necessary
use the
Optional 3/4” or 1” Cable Strain Relief
to pass
cables through cabinets, air system walls, etc.
Optional
5’, 10’, 20’ Cable
Extensions are available for longer runs.
When UV lamps, power supplies, and cables are in place
join the lamp and power supply cables by aligning the
electrical pins and flanges on the rubber connectors and
pushing them firmly together.
UV Lamp
Align Pins & Lamp Key
Push Firmly Together
UV Lamp
Power Supply
Cable
Lamp Key
