Service
Fresenius Medical Care
T688 Series
9
V1 Aug 2020
Seat cushion removal / replacement
•
To remove the seat cushion:
1. Apply the chair brakes.
2. To avoid unnecessary bending, press the memory button 3 on the hand control to raise the chair
to a suitable working height.
3. Place hands at the front of the seat (near where the knees would be positioned) and apply a
gentle pulling force upwards. The plastic clips located on the seat will come away from the frame.
4. Lift the seat cushion up and away from the frame.
•
To replace the seat cushion:
*Repeat the steps in reverse.
1. Position the metal strip on the back of the seat so that it fits into the receiving ledge located on
the chair frame.
2. Ensure the leg rest flap is attached to the round frame tube.
3. Position the plastic clips located at the front of the seat onto the round frame tube.
4. Ensure the frame and clips are properly aligned before applying a gentle downwards force.
All-Over Leg Rest removal / replacement
•
To remove the All-Over Leg Rest:
1. Apply the chair brakes.
2. To avoid unnecessary bending, press the memory button 3 on the hand control to raise the chair
to a suitable working height.
3. Locate the elastic loops under the leg rest and unclip from the pastic anchors.
4. Repeat this step in the gap between the seat and the back rest. It may be easier if the backrest is
removed.
•
To replace the All-Over Leg Rest
*Repeat the steps in reverse.
1. Attach the elastic loops to the anchor points located between the seat and the back rest.
2. Attach the elastic loops to the anchor points located under the leg rest.
