17
FAT should be between 20-24. If it is lower than 19, it means too thin. If it is between 25 and 29, it is
overweight, and if it exceeds 30, it is considered obese. (This data is for reference only and cannot be used
as medical data.)
F-1
Sex
01 Male
02 Female
F-2
Age
10------99
F-3
Hight
100----200
F-4
Weight
20-----150
F-5
FAT
≤19
Under weight
FAT
=(20---24)
Normal weight
FAT
=(25---29)
Over weight
FAT
≥30
Obesity
DISPLAY RANGE
：
Setting parameter
Initial
Set the Initial
value
Set Range
Display range
Time (Min:Sec)
0:00
30:00
5:00-99:00
0:00
－
99:59
Incline (Segement)
0
N/A
N/A
0-20
Speed (KM/H)
0.0
N/A
N/A
1.0-22.0KMH
Distance (KM)
0.00
1.00
0.50-60.0
0.00
－
60.0
Heart rate(times /
minute)
P
N/A
N/A
50-200
Calories(Kcal)
0.0
50.0
10.0-999.0
0.0
－
999.0
I.
SAFETY LOCK FUNCTION:
In any state, pulling off the safety lock can stop the running of the treadmill urgently, the treadmill will
stop urgently, the speed window will display "--", and the buzzer will give a "Bi-Bi" alarm 3; No other
operations can be performed outside of the shutdown. After the safety lock is properly re- installed, the
treadmill re-enters the standby state and waits for an input command.
J.
POWER SAVING MODE:
The system has a power-saving function. If there is no key command input within 10 minutes in the
standby state, the system enters the power-saving mode, automatically turns off the display, and presses
any key to wake up the system again.
K.
MP3 FUNCTION:
When connected to an MP3 or other audio device after power-on, the Display meter can play music. The
size of the sound is controlled on the audio device. Please pay attention to the size of the sound so as not
to affect the quality of the sound and the built-in audio circuit.
L.
SHUTDOWN:
The treadmill can be turned off at any time by turning off the power switch so that it does not damage the
treadmill.
M.
NOTE:
1.
Check if the power is loaded before the exercise; check if the safety lock is valid.
2.
An abnormal situation occurs during the movement, the safety lock can be pulled off, the running
opportunity is quickly decelerated to stop; then the safety lock is placed, the device is reset, and the input
command is awaited.
3.
If there is any problem with this machine, please contact the dealer. Non-professionals, please do not
attempt to disassemble or repair to avoid damage to the equipment.
