P
a
g
e
| 9 of 40
FREMCO A/S
ELLEHAMMERVEJ 14
|
DK9900 FREDERIKSHAVN, DENMARK
|
VAT NO.: DK30815416
TEL45 7230 1213
|
|
WWW.FREMCO.DK
•
External cleaning: Cleaning of the machine
should be done on a daily basis. Do not clean
the machine while the machine is running.
•
Internal cleaning, service and repair: Service
and repair must only be done by qualified
technicians, and only if power and compressed
air supply is disconnected. Do not remove the
protective covers of the machine for daily use.
Protectives covers must only be removed by
authorized personnel for service and
maintenance. After all kind of service and
maintenance protective covers must be put
back in place and secured properly with all
screws before operating.
WARNING
: Operation without
protective covers may lead to
machine damage and personal injury.
•
If an accident occurs, do as follows:
Stop the accident by turning off power and
compressed air supply.
Find the necessary help.
5. MAINTENANCE
Compressed air must be clean and dry. Use air filter and water separator.
Clean the wheels on a regular basis, at least once a day when the machine is in use.
Make sure the sensor arms are clean and can move freely.
Check gaskets and rubber belts on wheels for wear and tear on a daily basis and replace if necessary.
Machine service is required annually or every 350 km depending on what comes first.
NB: Humid and polluted air may influence
machine life and performance and may result in
increased wear.
NB: Failure to maintain and clean the machine
may affect machine reliability.
NB: To maintain your 36-months warranty, you
have to meet the given service requirements.
