P
a
g
e
| 15 of 20
FREMCO A/S
ELLEHAMMERVEJ 14
|
DK9900 FREDERIKSHAVN, DENMARK
|
VAT NO.: DK30815416
TEL45 7230 1213
|
|
WWW.FREMCO.DK
14.1. CHOOSING THE CORRECT ADAPTOR PLATES
A rule of thumb is that the adaptor plate must be at least 0.2 mm larger than the fiber.
Example: If the fiber is 1.1 mm, choose a 1.3 mm adaptor plate.
14.2. PHOTO GUIDE, CHANGING ADAPTOR PLATES
Preparation of adaptor kit for correct fiber and duct size
•
Choose the correct size of adaptor plate to suit
the fiber
•
Choose the correct size of duct adaptor to suit
the duct.
•
For NanoFlow MAX always use adaptor plates
and steel drive wheel marked with “MAX”
•
Mount duct adaptors in both adaptor plates.
•
Carefully press in the duct adaptors.
•
Check that the position of the duct adaptors is
correct. They must fit completely towards the
bottom of the adaptor plates.
•
The adaptor plates are now ready for mounting in
the NanoFlow MAX.
