•
call up information on mobile screens;
•
navigate from screen to screen;
•
set up the display;
•
record significant data.
The odometer is a seven-digit display with one deci-
mal point after the sixth digit, allowing it to display
tenths of miles (or kilometers). When first installed,
the odometer starts at 0.0 miles (or kilometers).
When replaced, the odometer starts again from 0.0.
INTERVAL IS SET TO
XXXXX MILES AMT
R
OR
Distance prior to reaching the
set Service Interval
Distance traveled beyond the
set Service Interval
R
SERVICE WAS DUE
12345 MILES AGO AMT
Time accumulated beyond the
set Service Interval
Time prior to reaching the
set Service Interval
INTERVAL IS SET TO
XXXX HOURS AMT
SERVICE
INFORMATION AMT
SERVICE
INFORMATION AMT
12345 MILES
TO NEXT SERVICE AMT
1234 HOURS
TO NEXT SERVICE AMT
SERVICE WAS DUE
1234 HOURS AGO AMT
R
OR
R
f040703
Go to Setup Information Screens
Go to Set−up Information Screens
Return to
Idle Hours
From Diagnostic
Information
Screen
12/17/2004
NOTE: Service information screens only appear if the service interval is set to MILES or HOURS in Setup Information.
Fig. 2.9, ICU4M Service Information Screens
SETUP
INFORMATION AMT
PUSH SET KEY TO
CHANGE SERVICE AMT
OR
S
INTERVAL
XXXXX MILES
<−−LESS MORE−−> AMT
If Service Interval is set to MILES
SERVICE INTERVAL
OFF/
MILES /HOURS AMT
S
PUSH SET KEY TO
CHANGE SERVICE MI AMT
PUSH SET KEY TO
CHANGE SERVICE HR AMT
S
SERVICE INTERVAL
OFF/ MILES /
HOURS AMT
If Service Interval is set to HOURS
INTERVAL
XXXX HOURS
<−−LESS MORE−−> AMT
S
To more Setup Information
Go to Vehicle Information Screens
f040704
Return to
Idle Hours
From Service
Information
Screen
12/17/2004
Fig. 2.10, ICU4M Setup Information Screens (for service intervals)
Instruments and Controls Identification
2.10