Maintenance Operation Sets
Maint.
No.
Operation Description
Service Schedules I
and II
IM
M1
M2
M3
83–03
ParkSmart
™
Inspection
•
•
•
•
88–01
Hood Rear Support Lubrication
•
•
•
•
*
On vehicles equipped with Detroit transmissions, the release bearing does not need to be lubricated. On vehicles equipped with Eaton Fuller UltraShift PLUS
transmissions, lubricate the release bearing every 50,000 miles (80 000 km) or 3 months.
†
Replace the clutch assembly for Detroit automated transmissions at 750,000-mile (1 200 000-km) intervals.
‡
For Schedule II vehicles with Detroit automated transmissions spec’d to haul more than 80,000 lb (36 000 kg), change the transmission fluid at 200,000-mile
(322 000-km) intervals.
§
For Eaton Fuller transmissions, fluid change intervals are extended to 500,000 miles (800 000 km) on vehicles filled with synthetic transmission fluid.
¶
For Schedule I vehicles with Detroit axles, complete this procedure once a year or every 25,000 miles (40 000 km), whichever comes first.
**
If equipped with an oil-coalescing desiccant cartridge, replace the cartridge once a year, regardless of mileage. Otherwise use the M3 maintenance interval.
††
Complete this procedure every 25,000 miles (40 225 km), 3 months, or 500 operating hours, whichever comes first.
Table 8, Maintenance Operation Sets
General Information
00
Maintenance Operation Sets Table: 00–08
Cascadia Maintenance Manual, August 2015
00/15
