Freggia WDIE Series, Manual

Page: 9 / 36

9
WASHING GUIDE
GB
• DETERGENT DRAWER:
1 Prewash
Softener
2 Washing
WASHING GUIDE
• CONTROL PANEL:
A LCD Display
B Delay/lock control button
C Spin button
D Prewash/disinfection button
E Turbo/lock control button
F Rinse button
G Dry button
H Start/pause button
I Program setting knob
WASH IN THE CORRECT WAY
Before attempting to operate the washing machine, ensure that the installation has been performed correctly, as described
in the instruction booklet.
• DAILY USE
1. Before putting clothes in the washing machine, empty the pockets of any hard or sharp object (nails, screws, coins,
pins and stones) that may damage the machine and garments.
2. To improve washing performance, introduce laundry into the washing machine without compressing it or over-
loading the machine. A whole load of highly absorbent fabrics, such as bathrobes and towels, can unbalance the
machine during the spin cycle. The automatic load balancing system arranges laundry in the most even manner
possible, and sets the optimum spin speed to minimise any vibrations.
3. Close the door making sure that garments are not caught between the seal and the door.
4. Put the correct amount of detergent in the drawer 2 . Insert the bulkhead supplied if you are using liquid detergent.
If you want to enable the prewash option, add the detergent in the drawer 1 . Use the drawer marked with the
special symbol . for the softener. After adding the detergent, gently close the drawer.
5. Select the wash program most suitable to the type of fabrics by using knob I following the instructions in the pro-
grams table. The LCD display will show the duration of the selected program with a full load. The remaining time
may vary during the course of the wash cycle according to the load. The word
End will appear on the display at the
end of the cycle.
6. Pressing the C button, a diff erent spin speed to that provided by the selected program can be set. The B button
allows you to delay the start of the wash cycle up to a maximum of 19 hours. Both values are shown on the LCD
Display.
7. Buttons D , E , F and G allow the selection of supplementary functions. The options selected are shown on the LCD
display. The duration of the wash cycle varies depending on the options enabled.
8. Press the start button H to start the wash cycle. On the display, the duration of the cycle with full load will be dis-
played. The easy logic system will update the remaining time during the cycle based on the actual load inserted.
9. The end of the wash cycle is indicated on the display with the words End Turn the knob I to the OFF position and
open the door to take out all the laundry.
10. The program can be cancelled at any time by turning knob I to the OFF position.
A F D G C B E H I