14
INSTALLATION INSTRUCTIONS
•
It is mandatory to use a power point with a ground terminal, connected in accordance with current safety
regulations.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualifi ed persons in order to avoid a hazard.
•
The installation of this appliance and the connection to the electrical system should be entrusted only to
a qualifi ed electrician.
•
Protection against the parts under tension must be ensured after instalation
•
The data of connection necessary are on the stickers place on the hob casing near the connection box.
•
The connection to the mains must be made using an earthed plug or via an omnipolar circuit breaking
device with a contact opening of at least 3 mm.
•
The electrical circuit must be separated from the network by adapted devices, for example: circuit breakers,
fuses or contactors.
Caution !
This appliance has only to be connected to a network 230 V~ 50/60 HzConnect always the earth wire.
Respect the connection diagram. The connection box is located underneath at the back of the hob
casing. To open the cover, use a medium screwdriver. Place it in the slits and open the cover.
ELECTRICAL CONNECTION
Mains
Connection
Cable diameter
Cable
Protection calibre
230~ 50/60Hz
1 Phase + N
3 x 2,5 mm
2
H 05 VV - F
H 05 RR - F
25 A *
400V~ 50/60Hz
2 Phase + N
4 x 1,5 mm
2
H 05 VV - F
H 05 RR - F
16 A *
* calculated with the simultaneous factor following the standard EN 60 335-2-6
CONNECTION OF THE HOB
•
SETTING UP THE CONFIGURATIONS:
NOTE:
For the various kinds of connection, use the brass bridges which are in the box next the terminal
• MONOPHASE
230V~1P+N
Put a bridge between terminal 1 and 2
Attach the green/yellow wire to the terminal Earth
The neutral N to the terminal 4
The phase L to one of the terminal 1 or 2
• BIPHASE
400V~2P+N
Attach the green/yellow wire to the terminal Earth
The neutral N to the terminal 4
The phase L1 to the terminal 1 and the phase L2 to the terminal 2
Summary of Contents for HCFE43B
