10
INSTRUCTIONS FOR THE USER
1. Electric burner Ø145, 1000 W
2. Electric burner Ø180, 1500 W
3. Fast-heating electric burner Ø145, 1500 W
4. Fast-heating electric burner Ø180, 2000 W
7. Hob setting indicator
8. Hob control knob
INSTRUCTIONS FOR THE USER
IT IS NECESSARY THAT ALL OPERATIONS REGARDING THE INSTALLATION ARE CARRIED OUT BY QUALIFIED
PDERSONNEL, IN CONFORMITY WITH THE REGULATIONS IN FORCE. THE SPECIFIC INSTRUCTIONS ARE
DESCRIBED IN THE BOOKLET SECTION INTENDED FOR THE INSTALLER.
USING THE ELECTRIC HOB
The electric plate is controlled by a rotary knob with 7 possible positions. You can set the necessary heating power by
turning the knob to the relevant position.
A light indicates when then the electric plate is working.
To assist you when cooking, a table has been provided below detailing what each heating power setting can be used
to make.
WARNING
• Use
fl at-bottomed pans with a diameter equal to that of the electric plate, or just slightly larger
than it.
•
Do not place food being prepared directly onto the hob itself.
•
Turn the hob off several minutes before fi nishing cooking, since the temperature of the electric
heater is prone to lag behind the temperature you have just set.
•
The electric plate remains hot for a substantial period of time after use – do not place your hands
or other objects on the hob so as to avoid injury or damage.
•
The electric plate may be cleaned using easily available kitchen cleaning products.
•
When the equipment is not working, always check that the knobs are in the off position.
•
While cooking with fat or oil, pay the utmost attention as these substances can catch fi re when
overheated.
•
Do not use sprays near the appliance when it is in operation.
•
Do not place unstable or deformed pots on the burner, so as to prevent them from overturning or
overfl owing.
•
Since stainless steel can darken upon the application of high temperatures, we do not recommend
placing food to be cooked for a long period of time in clay or cast-iron kitchenware. You should also
avoid using aluminium foil to protect the hob during use.
•
Do not place pans in the area where the control knobs are.
Note. When using the appliance for the fi rst time set the rotary knob to position 1 and leave it there for around 30
minutes, so as to get rid of any residual oil or moisture.
DESCRIPTION
Summary of Contents for HB302
