995367 – Revision A
Page 36 of 39
Step 5 – Remove the Leg Actuator Cover from the Base. (Refer to section 9.8)
Step 6 - Remove the Leg Actuator (Refer to section 9.6)
Step 7 – Remove the LH Leg and the RH Leg from the Base. (Refer to section 9.11) – The
Castors are not required to be removed.
Refitting / Replacement
Step 8 - Refitting is a reversal of the removal process noting the following point:
A)
Ensure the Star Knob is fully tightened to disallow any play between the Mast and Base
of the Hoist.
9.13 – Boom
Within this section it will explain the correct procedure on removing and reinstalling the Boom for
servicing procedures or replacement.
Removal
Step 1 – Remove the Lift Actuator Cable. (See section 9.2.2)
Step 2 – Remove the Lift Actuator. (See section 9.5)
Step 3 – Remove the Carry Bar. (See section 9.7)
Step 4 - Remove the plastic end cap from the Boom using a tool such as a flat head
screwdriver.
