53
ECP Mode Use DMA: When the onboard parallel port is set to ECP
mode, the parallel port has the option to use DMA “3” (default) or DMA
“1.”
Game Port Address: Enables you to specify the I/O address of the game
port. Options are “Disabled,” “201” (default), and “209.”
MIDI Port Address: Enables you to specify the I/O address of the MIDI
port if installed. Options are “Disabled”, “330” (default), “300”, and
“290”.
MIDI Port IRQ: Enables you to specify the IRQ of the MIDI port if
installed. Options are “5” and “10” (default).
If you make any changes to the onboard FDD controller, serial ports or
parallel ports in this setup, save the changes and turn off the system. After
powering up the system, ensure that the changes have taken effect.
Integrated Peripherals
BIOS Configuration
