Mainboard User’s Manual
42
Video: Set this field to the type of graphics card installed in your system.
If you are using a VGA or higher resolution card, choose the “EGA/
VGA” option. The options are:
H
EGA/VGA (default)
H
MONO
H
CGA 40
H
CGA 80
Halt On: This setting determines which type of errors will cause the
system to halt during bootup. The options are:
H
All Errors
H
No Errors
H
All, But Keyboard (default)
H
All, But Diskette
H
All, But Disk/Key
Base/Extended/Total Memory: These items are automatically detected
by the system at start up time. These are display-only fields. You cannot
make changes to these fields.
After you have made your selections in the Standard CMOS Setup screen,
press <ESC> to go back to the main screen.
Standard CMOS Setup
