56
P5F111 User’s Manual
System Environment Monitor
The System Environment Monitoring utility with the onboard VIA
Hardware monitoring system chip allow you to monitor your
system’s temperature, Fan speed and CPU voltage. Using this
utility, you can setup the upper and lower limits of these monitored
parameters. A pre-warning message will pop up on the screen when
the monitored parameters is out of the preset range.
A.1 The Steps to Install the System Environment
Monitor Driver
Step 1. Insert the manufacturer CD-ROM or diskette to your PC to install
the system monitor.
Step 2. Follow the instruction shows on the screen to finished the
installation. (The system will restart.)
Step 3. The following screen will appear (shown in the next page).
Step 4. Restart the PC.
After system back on then you are complete the installation of VGA
driver. A new version of the VGA drive can be downloaded from the
factory's BBS and Web site.
APPENDIX
