3. Hardware Installation
This chapter explains how to use your mainboard to build a powerful
computer system. At a minimum, you will need the following com-
ponents in order to build a fully functioning system.
•
Computer case with ATX power supply
•
PGA370 Processor
•
One SDRAM memory module
•
One floppy disk drive
•
One UDMA-66/100 IDE hard disk drive
•
One CD-ROM drive
•
One display monitor
•
One PS/2 mouse
•
One PS/2 keyboard
•
One set of loudspeakers
Of course, you can use the system I/O ports and expansion slots to
add many more features and components to your system than the
items listed above.
3.1. Unpacking
The P6F132/133 mainboard package contains the following items:
q
One mainboard
q
One IDE 40-pin ribbon cable
q
One floppy 34-pin ribbon cable
q
Driver and utility CD
q
One dual port USB bracket
q
User's manual
After removing the mainboard from its anti-static bag, place it on a
grounded or anti-static surface (component side up). Inspect the
mainboard and contact your vendor immediately if it is damaged.
